A Gold(I)-Acetylene Complex Synthesised using Single-Crystal Reactivity.

Using single-crystal to single-crystal solid/gas reactivity the gold(I) acetylene complex [Au(L1)(η2-HC≡CH)][BArF4] is cleanly synthesized by addition of acetylene gas to single crystals of [Au(L1)(CO)][BArF4] [L1 = tris-2-(4,4'-di-tert-butylbiphenyl)phosphine, ArF = 3,5-(CF3)2C6H3]. This simplest gold-alkyne complex has been characterized by single crystal X-ray diffraction, solution and solid-state NMR spectroscopy and periodic DFT. Bonding of HC≡CH with [Au(L1)]+ comprises both σ-donation and π-backdonation with additional dispersion interactions within the cavity-shaped phosphine.

Controlled cluster expansion at a Zintl cluster surface.

Reaction of the tris-hypersilyl nonagermanide Zintl cluster salt, K[Ge9 (Hyp)3 ] (Hyp=Si(SiMe3 )3 ) with [Rh(η2 ,η2 -L)Cl]2 (L=1,5-cyclooctadiene, COD; norbornadiene, NBD) afforded eleven- and twelve-vertex homo-multimetallic clusters by cluster core expansion. Using a stepwise procedure, starting from the Zintl cluster [Rh(COD){Ge9 (Hyp)3 }] and [Ir(COD)Cl]2 , this methodology was expanded for the synthesis of eleven-vertex hetero-multimetallic clusters. A mechanism for the formation of these first examples of closo eleven-vertex Zintl clusters is proposed, informed by density functional theory calculations.

Dehydropolymerization of Amine-Boranes using Bis(imino)pyridine Rhodium Pre-Catalysis: σ-Amine-Borane Complexes, Nanoparticles, and Low Residual-Metal BN-Polymers that can be Chemically Repurposed.

The sigma amine-borane complexes [Rh(L1)(η2 :η2 -H3 B⋅NRH2 )][OTf] (L1=2,6-bis-[1-(2,6-diisopropylphenylimino)ethyl]pyridine, R=Me, Et, n Pr) are described, alongside [Rh(L1)(NMeH2 )][OTf]. Using R=Me as a pre-catalyst (1 mol %) the dehydropolymerization of H3 B ⋅ NMeH2 gives [H2 BNMeH]n selectively. Added NMeH2 , or the direct use of [Rh(L1)(NMeH2 )][OTf], is required for initiation of catalysis, which is suggested to operate through the formation of a neutral hydride complex, Rh(L1)H. The formation of small (1-5 nm) nanoparticles is observed at the end of catalysis, but studies are ambiguous as to whether the catalysis is solely nanoparticle promoted or if there is a molecular homogeneous component. [Rh(L1)(NMeH2 )][OTf] is shown to operate at 0.025 mol % loadings on a 2 g scale of H3 B ⋅ NMeH2 to give polyaminoborane [H2 BNMeH]n [Mn =30,900 g/mol, Ð=1.8] that can be purified to a low residual [Rh] (6 µg/g). Addition of Na[N(SiMe3 )2 ] to [H2 BNMeH]n results in selective depolymerization to form the eee-isomer of N,N,N-trimethylcyclotriborazane [H2 BNMeH]3 : the chemical repurposing of a main-group polymer.

In crystallo lattice adaptivity triggered by solid-gas reactions of cationic group 7 pincer complexes.

The group 7 complexes [M(κ3-2,6-(R2PO)2C5H3N)(CO)2L][BArF4] [M = Mn, R = iPr, L = THF; M = Re, R = tBu, L = vacant site] undergo in crystallo solid-gas reactivity with CO to form the products of THF substitution or CO addition respectively. There is a large, local, adaptive change of [BArF4] anions for M = Mn, whereas for M = Re the changes are smaller and also remote to the site of reactivity.

A comparison of non-covalent interactions in the crystal structures of two σ-alkane complexes of Rh exhibiting contrasting stabilities in the solid state.

Non-covalent interactions surrounding the cationic Rh σ-alkane complexes within the crystal structures of [(Cy2PCH2CH2PCy2)Rh(NBA)][BArF4], [1-NBA][BArF4] (NBA = norbornane, C7H12; ArF = 3,5-(CF3)2C6H3), and [1-propane][BArF4] are analysed using Quantum Theory of Atoms in Molecules (QTAIM) and Independent Gradient Model approaches, the latter under a Hirshfeld partitioning scheme (IGMH). In both structures the cations reside in an octahedral array of [BArF4]- anions within which the [1-NBA]+ cation system exhibits a greater number of C-H⋯F contacts to the anions. QTAIM and IGMH analyses indicate these include the strongest individual atom-atom non-covalent interactions between the cation and the anion in these systems. The IGMH approach highlights the directionality of these C-H⋯F contacts that contrasts with the more diffuse C-H⋯π interactions. The accumulative effects of the latter lead to a more significant stabilizing contribution. IGMH %δGatom plots provide a particularly useful visual tool to identify key interactions and highlight the importance of a -{C3H6}- propylene moiety that is present within both the propane and NBA ligands (the latter as a truncated -{C3H4}- unit) and the cyclohexyl rings of the phosphine substituents. The potential for this to act as a privileged motif that confers stability on the crystal structures of σ-alkane complexes in the solid-state is discussed. The greater number of C-H⋯F inter-ion interactions in the [1-NBA][BArF4] system, coupled with more significant C-H⋯π interactions are all consistent with greater non-covalent stabilisation around the [1-NBA]+ cation. This is also supported by larger computed δGatom indices as a measure of cation-anion non-covalent interaction energy.

Mechanistic Insights into Molecular Crystalline Organometallic Heterogeneous Catalysis through Parahydrogen-Based Nuclear Magnetic Resonance Studies.

The heterogeneous solid-gas reactions of crystals of [Rh(L2)(propene)][BArF4] (1, L2 = tBu2PCH2CH2PtBu2) with H2 and propene, 1-butene, propyne, or 1-butyne are explored by gas-phase nuclear magnetic resonance (NMR) spectroscopy under batch conditions at 25 °C. The temporal evolution of the resulting parahydrogen-induced polarization (PHIP) effects measures catalytic flux and thus interrogates the efficiency of catalytic pairwise para-H2 transfer, speciation changes in the crystalline catalyst at the molecular level, and allows for high-quality single-scan 1H, 13C NMR gas-phase spectra for the products to be obtained, as well as 2D-measurements. Complex 1 reacts with H2 to form dimeric [Rh(L2)(H)(µ-H)]2[BArF4]2 (4), as probed using EXAFS; meanwhile, a single-crystal of 1 equilibrates NMR silent para-H2 with its NMR active ortho isomer, contemporaneously converting into 4, and 1 and 4 each convert para-H2 into ortho-H2 at different rates. Hydrogenation of propene using 1 and para-H2 results in very high initial polarization levels in propane (>85%). Strong PHIP was also detected in the hydrogenation products of 1-butene, propyne, and 1-butyne. With propyne, a competing cyclotrimerization deactivation process occurs to afford [Rh(tBu2PCH2CH2PtBu2)(1,3,4-Me3C6H3)][BArF4], while with 1-butyne, rapid isomerization of 1-butyne occurs to give a butadiene complex, which then reacts with H2 more slowly to form catalytically active 4. Surprisingly, the high PHIP hydrogenation efficiencies allow hyperpolarization effects to be seen when H2 is taken directly from a regular cylinder at 25 °C. Finally, changing the chelating phosphine to Cy2PCH2CH2PCy2 results in initial high polarization efficiencies for propene hydrogenation, but rapid quenching of the catalyst competes to form the zwitterion [Rh(Cy2PCH2CH2PCy2){η6-(CF3)2(C6H3)}BArF3].

Polyphosphinoborane Block Copolymer Synthesis Using Catalytic Reversible Chain-Transfer Dehydropolymerization.

An amphiphilic block copolymer of polyphosphinoborane has been prepared by a mechanism-led strategy of the sequential catalytic dehydropolymerization of precursor monomers, H3 B ⋅ PRH2 (R=Ph, n-hexyl), using the simple pre-catalyst [Rh(Ph2 PCH2 CH2 PPh2 )2 ]Cl. Speciation, mechanism and polymer chain growth studies support a step-growth process where reversible chain transfer occurs, i.e. H3 B ⋅ PRH2 /oligomer/polymer can all coordinate with, and be activated by, the catalyst. Block copolymer [H2 BPPhH]110 -b-[H2 BP(n-hexyl)H]11 can be synthesized and self-assembles in solution to form either rod-like micelles or vesicles depending on solvent polarity.

Single-Crystal to Single-Crystal Addition of H2 to [Ir(iPr-PONOP)(propene)][BArF 4] and Comparison Between Solid-State and Solution Reactivity.

The reactivity of the Ir(I) PONOP pincer complex [Ir(iPr-PONOP)(η2-propene)][BArF 4], 6, [iPr-PONOP = 2,6-(iPr2PO)2C6H3N, ArF = 3,5-(CF3)2C6H3] was studied in solution and the solid state, both experimentally, using molecular density functional theory (DFT) and periodic-DFT computational methods, as well as in situ single-crystal to single-crystal (SC-SC) techniques. Complex 6 is synthesized in solution from sequential addition of H2 and propene, and then the application of vacuum, to [Ir(iPr-PONOP)(η2-COD)][BArF 4], 1, a reaction manifold that proceeds via the Ir(III) dihydrogen/dihydride complex [Ir(iPr-PONOP)(H2)H2][BArF 4], 2, and the Ir(III) dihydride propene complex [Ir(iPr-PONOP)(η2-propene)H2][BArF 4], 7, respectively. In solution (CD2Cl2) 6 undergoes rapid reaction with H2 to form dihydride 7 and then a slow (3 d) onward reaction to give dihydrogen/dihydride 2 and propane. DFT calculations on the molecular cation in solution support this slow, but productive, reaction, with a calculated barrier to rate-limiting propene migratory insertion of 24.8 kcal/mol. In the solid state single-crystals of 6 also form complex 7 on addition of H2 in an SC-SC reaction, but unlike in solution the onward reaction (i.e., insertion) does not occur, as confirmed by labeling studies using D2. The solid-state structure of 7 reveals that, on addition of H2 to 6, the PONOP ligand moves by 90° within a cavity of [BArF 4]- anions rather than the alkene moving. Periodic DFT calculations support the higher barrier to insertion in the solid state (ΔG ‡ = 26.0 kcal/mol), demonstrating that the single-crystal environment gates onward reactivity compared to solution. H2 addition to 6 to form 7 is reversible in both solution and the solid state, but in the latter crystallinity is lost. A rare example of a sigma amine-borane pincer complex, [Ir(iPr-PONOP)H2(η1-H3B·NMe3)][BArF 4], 5, is also reported as part of these studies.

Dehydropolymerization of H3B·NMeH2 Mediated by Cationic Iridium(III) Precatalysts Bearing κ3- i Pr-PN R P Pincer Ligands (R = H, Me): An Unexpected Inner-Sphere Mechanism.

The dehydropolymerization of H3B·NMeH2 to form N-methylpolyaminoborane using neutral and cationic catalysts based on the {Ir( i Pr-PNHP)} fragment [ i Pr-PNHP = κ3-(CH2CH2P i Pr2)2NH] is reported. Neutral Ir( i Pr-PNHP)H3 or Ir( i Pr-PNHP)H2Cl precatalysts show no, or poor and unselective, activity respectively at 298 K in 1,2-F2C6H4 solution. In contrast, addition of [NMeH3][BArF 4] (ArF = 3,5-(CF3)2C6H3) to Ir( i Pr-PNHP)H3 immediately starts catalysis, suggesting that a cationic catalytic manifold operates. Consistent with this, independently synthesized cationic precatalysts are active (tested between 0.5 and 2.0 mol % loading) producing poly(N-methylaminoborane) with M n ∼ 40,000 g/mol, D ∼1.5, i.e., dihydrogen/dihydride, [Ir( i Pr-PNHP)(H)2(H2)][BArF 4]; σ-amine-borane [Ir( i Pr-PNHP)(H)2(H3B·NMe3)][BArF 4]; and [Ir( i Pr-PNHP)(H)2(NMeH2)][BArF 4]. Density functional theory (DFT) calculations probe hydride exchange processes in two of these complexes and also show that the barrier to amine-borane dehydrogenation is lower (22.5 kcal/mol) for the cationic system compared with the neutral system (24.3 kcal/mol). The calculations show that the dehydrogenation proceeds via an inner-sphere process without metal-ligand cooperativity, and this is supported experimentally by N-Me substituted [Ir( i Pr-PNMeP)(H)2(H3B·NMe3)][BArF 4] being an active catalyst. Key to the lower barrier calculated for the cationic system is the outer-sphere coordination of an additional H3B·NMeH2 with the N-H group of the ligand. Experimentally, kinetic studies indicate a complex reaction manifold that shows pronounced deceleratory temporal profiles. As supported by speciation and DFT studies, a key observation is that deprotonation of [Ir( i Pr-NHP)(H)2(H2)][BArF 4], formed upon amine-borane dehydrogenation, by the slow in situ formation of NMeH2 (via B-N bond cleavage), results in the formation of essentially inactive Ir( i Pr-PNHP)H3, with a coproduct of [NMeH3]+/[H2B(NMeH2)2]+. While reprotonation of Ir( i Pr-PNHP)H3 results in a return to the cationic cycle, it is proposed, supported by doping experiments, that reprotonation is attenuated by entrainment of the [NMeH3]+/[H2B(NMeH2)2]+/catalyst in insoluble polyaminoborane. The role of [NMeH3]+/[H2B(NMeH2)]+ as chain control agents is also noted.

Zintl cluster supported low coordinate Rh(i) centers for catalytic H/D exchange between H2 and D2.

Ligand exchange reactions of [Rh(COD){η4-Ge9(Hyp)3}] with L-type nucleophiles such as PMe3, PPh3, IMe4 (IMe4 = 1,3,4,5-tetramethylimidazol-2-ylidene) or [W(Cp)2H2] result in the displacement of the COD ligand to afford clusters with coordinatively unsaturated trigonal pyramidal rhodium(i) centers [Rh(L){η3-Ge9(Hyp)3}]. These species can be readily protonated allowing access to cationic rhodium-hydride complexes, e.g. [RhH(PPh3){η3-Ge9(Hyp)3}]+. These clusters act as catalysts in H/D exchange between H2 and D2 and alkene isomerisation, thereby illustrating that metal-functionalized Zintl clusters are active in both H-H and C-H bond activation processes. The mechanism of H/D exchange was probed using parahydrogen induced polarization experiments.

Inverse Isotope Effects in Single-Crystal to Single-Crystal Reactivity and the Isolation of a Rhodium Cyclooctane σ-Alkane Complex.

The sequential solid/gas single-crystal to single-crystal reaction of [Rh(Cy2P(CH2)3PCy2)(COD)][BArF 4] (COD = cyclooctadiene) with H2 or D2 was followed in situ by solid-state 31P{1H} NMR spectroscopy (SSNMR) and ex situ by solution quenching and GC-MS. This was quantified using a two-step Johnson-Mehl-Avrami-Kologoromov (JMAK) model that revealed an inverse isotope effect for the second addition of H2, that forms a σ-alkane complex [Rh(Cy2P(CH2)3PCy2)(COA)][BArF 4]. Using D2, a temporal window is determined in which a structural solution for this σ-alkane complex is possible, which reveals an η2,η2-binding mode to the Rh(I) center, as supported by periodic density functional theory (DFT) calculations. Extensive H/D exchange occurs during the addition of D2, as promoted by the solid-state microenvironment.

MicroED characterization of a robust cationic σ-alkane complex stabilized by the [B(3,5-(SF5)2C6H3)4]- anion, via on-grid solid/gas single-crystal to single-crystal reactivity.

Microcrystalline (∼1 µm) [Rh(Cy2PCH2CH2PCy2)(norbornadiene)][S-BArF4], [S-BArF4] = [B(3,5-(SF5)2C6H3)4]-, reacts with H2 in a single-crystal to single-crystal transformation to form the σ-alkane complex [Rh(Cy2PCH2CH2PCy2)(norbornane)][S-BArF4], for which the structure was determined by microcrystal Electron Diffraction (microED), to 0.95 Å resolution, via an on-grid hydrogenation, and a complementary single-crystal X-ray diffraction study on larger, but challenging to isolate, crystals. Comparison with the [BArF4]- analogue [ArF = 3,5-(CF3)2(C6H3)] shows that the [S-BArF4]- anion makes the σ-alkane complex robust towards decomposition both thermally and when suspended in pentane. Subsequent reactivity with dissolved ethene in a pentane slurry, forms [Rh(Cy2PCH2CH2PCy2)(ethene)2][S-BArF4], and the catalytic dimerisation/isomerisation of ethene to 2-butenes. The increased stability of [S-BArF4]- salts is identified as being due to increased non-covalent interactions in the lattice, resulting in a solid-state molecular organometallic material with desirable stability characteristics.

Metathesis by Partner Interchange in σ-Bond Ligands: Expanding Applications of the σ-CAM Mechanism.

In 2007 two of us defined the σ-Complex Assisted Metathesis mechanism (Perutz and Sabo-Etienne, Angew. Chem. Int. Ed. 2007, 46, 2578-2592), that is, the σ-CAM concept. This new approach to reaction mechanisms brought together metathesis reactions involving the formation of a variety of metal-element bonds through partner-interchange of σ-bond complexes. The key concept that defines a σ-CAM process is a single transition state for metathesis that is connected by two intermediates that are σ-bond complexes while the oxidation state of the metal remains constant in precursor, intermediates and product. This mechanism is appropriate in situations where σ-bond complexes have been isolated or computed as well-defined minima. Unlike several other mechanisms, it does not define the nature of the transition state. In this review, we highlight advances in the characterization and dynamic rearrangements of σ-bond complexes, most notably alkane and zincane complexes, but also different geometries of silane and borane complexes. We set out a selection of catalytic and stoichiometric examples of the σ-CAM mechanism that are supported by strong experimental and/or computational evidence. We then draw on these examples to demonstrate that the scope of the σ-CAM mechanism has expanded to classes of reaction not envisaged in 2007 (additional σ-bond ligands, agostic complexes, sp2 -carbon, surfaces). Finally, we provide a critical comparison to alternative mechanisms for metathesis of metal-element bonds.

Controlled Synthesis of Well-Defined Polyaminoboranes on Scale Using a Robust and Efficient Catalyst.

The air tolerant precatalyst, [Rh(L)(NBD)]Cl ([1]Cl) [L = κ3-(iPr2PCH2CH2)2NH, NBD = norbornadiene], mediates the selective synthesis of N-methylpolyaminoborane, (H2BNMeH)n, by dehydropolymerization of H3B·NMeH2. Kinetic, speciation, and DFT studies show an induction period in which the active catalyst, Rh(L)H3 (3), forms, which sits as an outer-sphere adduct 3·H3BNMeH2 as the resting state. At the end of catalysis, dormant Rh(L)H2Cl (2) is formed. Reaction of 2 with H3B·NMeH2 returns 3, alongside the proposed formation of boronium [H2B(NMeH2)2]Cl. Aided by isotopic labeling, Eyring analysis, and DFT calculations, a mechanism is proposed in which the cooperative "PNHP" ligand templates dehydrogenation, releasing H2B═NMeH (ΔG‡calc = 19.6 kcal mol-1). H2B═NMeH is proposed to undergo rapid, low barrier, head-to-tail chain propagation for which 3 is the catalyst/initiator. A high molecular weight polymer is formed that is relatively insensitive to catalyst loading (Mn ∼71 000 g mol-1; D, of ∼ 1.6). The molecular weight can be controlled using [H2B(NMe2H)2]Cl as a chain transfer agent, Mn = 37 900-78 100 g mol-1. This polymerization is suggested to arise from an ensemble of processes (catalyst speciation, dehydrogenation, propagation, chain transfer) that are geared around the concentration of H3B·NMeH2. TGA and DSC thermal analysis of polymer produced on scale (10 g, 0.01 mol % [1]Cl) show a processing window that allows for melt extrusion of polyaminoborane strands, as well as hot pressing, drop casting, and electrospray deposition. By variation of conditions in the latter, smooth or porous microstructured films or spherical polyaminoboranes beads (∼100 nm) result.

Ortho-aryl substituted DPEphos ligands: rhodium complexes featuring C-H anagostic interactions and B-H agostic bonds.

The synthesis of new Schrock-Osborn Rh(i) pre-catalysts with ortho-substituted DPEphos ligands, [Rh(DPEphos-R)(NBD)][BArF 4] [R = Me, OMe, iPr; ArF = 3,5-(CF3)2C6H3], is described. Along with the previously reported R = H variant, variable temperature 1H NMR spectroscopic and single-crystal X-ray diffraction studies show that these all have axial (C-H)⋯Rh anagostic interactions relative to the d8 pseudo square planar metal centres, that also result in corresponding downfield chemical shifts. Analysis by NBO, QTAIM and NCI methods shows these to be only very weak C-H⋯Rh bonding interactions, the magnitudes of which do not correlate with the observed chemical shifts. Instead, as informed by Scherer's approach, it is the topological positioning of the C-H bond with regard to the metal centre that is important. For [Rh(DPEphos-iPr)(NBD)][BArF 4] addition of H2 results in a Rh(iii) iPr-C-H activated product, [Rh(κ3,σ-P,O,P-DPEphos-iPr')(H)][BArF 4]. This undergoes H/D exchange with D2 at the iPr groups, reacts with CO or NBD to return Rh(i) products, and reaction with H3B·NMe3/tert-butylethene results in a dehydrogenative borylation to form a complex that shows both a non-classical B-H⋯Rh 3c-2e agostic bond and a C-H⋯Rh anagostic interaction at the same metal centre.

Cluster expansion and vertex substitution pathways in nickel germanide Zintl clusters.

We describe the reactivity of the hypersilyl-functionalized Zintl cluster salt K[Ge9(Hyp)3] towards the nickel reagents Ni(COD)2 and Ni(Cp)2, which gives rise to markedly different complexes. In the case of Ni(COD)2 (COD = 1,5-cyclooctadiene), a dianionic sandwich-like cluster [Ni{Ge9(Hyp)3}2]2- (1) was obtained, in line with a simple ligand substitution reaction of COD by [Ge9(Hyp)3]-. By contrast, when an analogous reaction with Ni(Cp)2 (Cp = cyclopentadienyl) was performed, vertex substitution of the [Ge9(Hyp)3]- precursor was observed, giving rise to the nine-vertex nido-cluster (Cp)Ni[Ge8(Hyp)3] (2). This is the first instance of vertex substitution at a hypersilyl-functionalized Zintl cluster cage. The electrochemical behavior of these compounds was explored and showed reversible redox behaviour for both clusters.